Description
- Stereo Pair for Overheads, Pianos & More
- Cardioid Polar Pattern
- Transformerless Circuitry
- Selectable 20 dB Pad
- Selectable Low-Cut Filter at 80 Hz
- Handles SPL up to 156 dB
- All-Metal Housing
- Gold-Plated XLR Connectors
- Includes Mic Clips & Windscreens
Designed for drums, guitars, pianos, or indeed, any application requiring a pencil-mic design, the sE Electronic sE7 Stereo Pair offers two back-electret, small-diaphragm condenser microphones. This is a matched pair suitable for stereo-miking drum overheads and other instruments. Each mic sports a cardioid polar pattern. Fashioned from class-A circuitry and utilizing a transformerless output, each microphone captures sound with clarity and neutrality across its frequency response, thus eschewing overly harsh highs and aiding in a pleasurable bottom end.
A switchable 20 dB attenuation pad in each mic allows you to use the pair with loud instruments, doing so with a favorable signal-to-noise ratio. Engaging the 80 Hzlow-cut filter helps reduce rumble and other unwanted bass issues. Thus, you can use the mics in both close and distant miking scenarios.
An all-metal chassis in each microphone provides a robust, roadworthy construction, while gold-plated XLR terminations ensure security in the connecting process. Mic clips and windscreens are included.
UPC: 819032011546 In the Box sE Electronics sE7 Small-Diaphragm Condenser Microphone (Matched Stereo Pair)
sE Electronics SE7 specs
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Transducer | Electret Condenser |
| Diaphragm | 0.5″ / 12.70mm |
| Tube | No |
| Polar Pattern | Cardioid |
| Frequency Range | 20Hz to 20kHz |
| Signal to Noise Ratio | Cardioid: 78dB |
| Equivalent Noise Level | Cardioid: 16 dBA-Weighted |
| Maximum SPL | Cardioid: 136dB SPL Cardioid: 156dB SPL Depending on pad position
|
| Pad | -20 dB |
| Impedance | Cardioid: 200Ohms |
| Load Impedance | 1kOhms |
| Sensitivity | Cardioid: 19mV/Pa |
| Low-Cut Filter | 6dB/Octave@ 80Hz |
| Dynamic Range | Cardioid: 120 dB Cardioid: 140 dB Depending on pad position
|
| General | |
|---|---|
| Output Connectors | 1 x 3-Pin XLR |
| Operating Current Consumption | 3mA |
| Operating Voltage | 48V |
| Length | 4.72″ / 120mm |
| Diameter | 0.91″ / 23mm |
| Weight | 4.52oz / 128g |
| Packaging Info | |
|---|---|
| Package Weight | 1.11 lb |
| Box Dimensions (LxWxH) | 8.0 x 6.15 x 2.2″ |
All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Reviews
There are no reviews yet.