Description
- Characteristic of a CMIT in Compact Form
- Integrated RFI Shield
- Supercardioid Polar Pattern
- P12 and P48 Phantom Powering
- Low Current Draw
- Fixed Low-Cut Filter at 70 Hz
- Short and Lightweight
- XLR 3-Pin Output
- Includes Foam Windscreen
- Includes Stand Clamp with Swivel
The anthracite gray Schoeps MiniCMIT is a miniature shotgun microphone designed to provide the characteristics of standard CMIT mic in a short and lightweight body. Delivering accurate close and distant capture of dialog and musical instruments, it is ideal for boom operators, audio engineers, and musicians in film, television, and video production as well as music recording applications. Its supercardioid/lobe-shaped polar pattern yields precise directionality, high immunity to wind noise, and low coloration at the off-axis sections of the capsule. An integrated RFI shield yields enhanced rejection of radio-frequency interference.
The MiniCMIT features the same frequency response as the CMIT 5, allowing either microphone to be used without altering the sound. A fixed 24 dB/octave low-cut filter at 70 Hz prevents proximity effect and build-up of low frequencies. It supports P12 and P48 phantom powering with low current draw and utilizes an XLR 3-pin output for compatibility with most microphone preamps. The MiniCMIT microphone includes a foam windscreen and a swivel-type stand clamp. Offers the tonal characteristics of the CMIT 5 in a lightweight body less than 6″ long Fixed 4th-order (24 dB/octave) low-cut filter at 70 Hz Works on a variety of phantom power voltages Integrated RFI shield rejects interference from radio frequencies
Schoeps MiniCMIT specs
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Transducer | Condenser |
| Tube | No |
| Polar Pattern | Supercardioid |
| Frequency Range | Not Specified by Manufacturer |
| Equivalent Noise Level | 14 dBA-Weighted 24 dBCCIR |
| Maximum SPL | 130dB SPL 115dB SPL |
| Pad | None |
| Impedance | 100Ohms |
| Sensitivity | 16.5mV/Pa |
| Low-Cut Filter | 24dB/Octave@ 70Hz |
| CMRR | Not Specified by Manufacturer |
| General | |
|---|---|
| Output Connectors | 1 x 3-Pin XLR |
| Operating Current Consumption | 2.3mA |
| Operating Voltage | 11 to 48V |
| Length | 5.94″ / 151mm |
| Diameter | 0.83″ / 21mm |
| Weight | 2.75oz / 78g |
In the Box Schoeps MiniCMIT Miniature Shotgun Microphone (Anthracite Gray)
- W 140G Foam Windscreen for Schoeps CMIT5U and MiniCMIT Shotgun Microphones (Gray)
- SG20 Microphone Adapter Stand Clamp
- Limited 2-Year Warranty
All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Reviews
There are no reviews yet.