FREE SHIPPING ON ALL ORDERS OVER $30 .
Previous
Previous Product Image

Elinchrom Rotalux Octabox (135cm / 53″)

Original price was: $541.00.Current price is: $99.00.
Next

Arista EDU Ultra 200 Black and White Negative Film (4 x 5″, 25 Sheets)

Original price was: $89.00.Current price is: $44.50.
Next Product Image

sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)

Original price was: $963.99.Current price is: $99.00.

SKU: VC84643749294 Category:
Trust Badge Image

Description

  • Cardioid Polar Pattern
  • Matched Pair for Stereo Recordings
  • Gold-Sputtered, Small-Diaphragm Condenser
  • Transformerless Design for Transparency
  • Selectable -10 dB and -20 dB Pad
  • Low-Cut Filter at 80 Hz and 160 Hz
  • All-Metal Chassis
  • Includes 2 Mic Clips
  • Includes Windscreens & Mounting Bar
  • Includes Metal Flight Case

Designed for stereo recording, the sE Electronics sE8 Matched Pair gives you two sE8 microphones in one convenient package. The sE8 itself is is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule. Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound, as well as a detailed transient response. With two microphones matched specifically for consistency, you’ll be able to capture a clear and accurate stereo image.

The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums, and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately.

Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You’ll also note a switchable low-pass filter that rolls off low end at either 80 Hz or 160 Hz at 6 dB per octave.

To enhance durabilityand to reject electrical interference and noisethe sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, the microphones come with two mic clips, two thread adapters, two windscreens, a stereo bar for mounting the microphones, and a robust metal case for protecting the mics when they’re not in use.

Key Features at a Glance

  • 3-micron, gold-sputtered diaphragm
  • Handcrafted, hand-tuned capsule
  • Precision electrode design for a linear, naturalistic response
  • Backplate design provides smooth, natural sound and consistent off-axis response
  • Electronic design provides low noise without the use of integrated circuits
  • Transformerless design for transparency and clarity
  • Class-A circuitry for a high dynamic range and transient response without distortion
  • -10 dB and -20 dB pads, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more
  • Low-pass filters, selectable between 80 Hz and 160 Hz
  • All-metal chassis provides efficient rejection of electrical interference and noise
  • Includes two mic clips, each with a thread adapter
  • Includes two windscreens
  • Includes stereo bar for mounting microphones for stereo recording
  • includes a robust metal case

UPC: 819032011225 In the Box sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)

  • Set of Mic Clips and Thread Adapters
  • Set of Windscreens (2x)
  • Stereo Mounting Bar
  • Metal Flight Case
  • Limited 3-Year Warranty

sE Electronics sE8 specs

Analog Performance
Sound Field Mono
Transducer Condenser
Tube No
Polar Pattern Cardioid
Frequency Range 20Hz to 20kHz
Signal to Noise Ratio Cardioid: 81dB
Equivalent Noise Level Cardioid: 13 dBA-Weighted
Maximum SPL Cardioid: 159dB SPLPeak
Pad -10 dB
-20 dB
Impedance Cardioid: 110Ohms
Load Impedance 1kOhms

>1 kOhms

Sensitivity Cardioid: 25mV/Pa
Low-Cut Filter 6dB/Octave@ 80Hz
6dB/Octave@ 160Hz
CMRR Not specified by manufacturer
General
Output Connectors 1 x 3-Pin XLR
Operating Current Consumption 2.7mA
Operating Voltage 48V
AC Input Power Not specified by manufacturer
Length 4.72″ / 120mm
Diameter 0.91″ / 23mm
Weight 4.97oz / 141g

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Reviews

There are no reviews yet.

Be the first to review “sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)”

Your email address will not be published. Required fields are marked *

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping